Adafruit industries llc порты что это

Adafruit industries llc порты что это

Скачай курс
в приложении

Перейти в приложение
Открыть мобильную версию сайта

© 2013 — 2023. Stepik

Наши условия использования и конфиденциальности

Public user contributions licensed under cc-wiki license with attribution required

SOVLED! Adafruit Industries LLC Ports

Once it comes to Arduino IDE installation, the Windows Security prompt regarding Adafruit Industries LLC Ports is the topic of many discussions. Unable to make up your mind on whether you should give the prompt go-ahead? In that case, this article is going to be of use to you. Down below is a compilation of information about Adafruit Industries LLC Ports as well as its role.

What Is It

For your information, Adafruit Industries LLC Ports is a driver used to control input and output ports. It was developed by Adafruit Industries LLC, a manufacturer and distributor of electronic components, tools and software. Adafruit has partnered with Arduino to provide support to Arduino-compatible boards as well as Arduino AVR Boards platforms. Since Arduino IDE is a product of Arduino, its installation includes Adafruit Industries LLC Ports.

Action To Take

If you run into the Windows Security prompt about Adafruit Industries LLC Ports while installing Arduino IDE, feel free to hit Install. Adafruit Industries is a legitimate company so it won’t hurt to check the checkbox next to Always trust software from “Adafruit Industries” before hitting Install. Of course, the decision is up to you but you don’t have to worry about a thing in most of the cases.

Frequently Asked Questions

How do I install Adafruit Industries LLC Ports manually?

• Step 1: Download the driver file from the Adafruit website.
• Step 2: Extract the contents of the zip file.
• Step 3: Double-click the extracted file.
• Step 4: Follow on-screen instructions.
• Step 5: Restart your computer.

Is it possible to remove Adafruit Industries LLC Ports?

If you wish to remove Windows Driver Package – Adafruit Industries LLC from your PC, you have a few options. You may use either the built-in Windows Uninstaller or a third-party uninstaller. Advanced Uninstaller Pro is currently one the most effective and efficient third-party software that can be used to uninstall the drivers in question.

• Step 1: Go to the Advanced Uninstaller Pro download page.
• Step 2: Download the setup by clicking on the DOWNLOAD NOW button
• Step 3: Double-click on the setup file and follow the installation guide to install Advanced Uninstaller PRO on your computer.
• Step 4: Launch the Advanced Uninstaller pro
• Step 5: Click on General Tools on the left pane of the program’s startup window.
• Step 6: Select the Uninstall Programs feature. This will automatically display a list of all programs installed on your computer.
• Step 7: Scroll the list of applications until you locate Adafruit Industries LLC Ports, or simply activate the Search field and type in the driver name. The driver will be located automatically if it is installed on your PC.
• Step 8: Press the Uninstall button. A window asking you to confirm will show up. Accept the removal by clicking Uninstall. Advanced Uninstaller PRO will automatically uninstall Adafruit Industries LLC Ports from your computer.
• Step 9: Advanced Uninstaller PRO will ask you to run an additional cleanup after removing the drivers. Click Next to proceed with the cleanup. All the items that belong to Adafruit Industries LLC Ports that have been left behind will be detected, and you will be asked if you want to delete them. Follow through with the prompts to complete the cleanup.
• Step 10: Restart your computer.

How come Arduino IDE requires me to install several Adafruit drivers?

As you install Arduino IDE, you may notice that it’s accompanied by a couple of drivers for Adafruit products. That seems odd at a glance but there’s a good reason for it. Adafruit offers a wide range of open-source hardware and software products. Most of their products are popular Arduino-compatible, such as sensors, boards, and displays. By installing the Adafruit drivers, the Arduino IDE can easily detect and communicate with all Adafruit products.

Is Adafruit compatible with Arduino?

Yes, Adafruit is compatible with Arduino. Adafruit offers various Arduino-compatible products, including development boards, sensors, and modules. Adafruit also provides a wealth of information and resources on Arduino, making it a great choice for anyone interested in using this popular open-source platform.

What is the Adafruit library in Arduino?

The Adafruit library is a set of functions that allows you to control and interact with Adafruit products from within the Arduino IDE. With the Adafruit library, you can easily access and control all of the features of Adafruit products, from LEDs to sensors to displays. The Adafruit library makes it easy to start with Adafruit products and simplifies using them in your Arduino projects.

Is Adafruit the same as Arduino?

The short answer is no, Adafruit is not the same as Arduino. Adafruit is a manufacturer of electronic hardware compatible with the Arduino platform. On the other hand, Arduino is an open-source electronics platform that can be used to create a variety of electronic devices. Adafruit products are often used in Arduino projects but are not the same.

As PCWorld’s senior editor, Mark focuses on Microsoft news and chip technology, among other beats. He has formerly written for PCMag, BYTE, Slashdot, eWEEK, and ReadWrite.

What Is Adafruit Industries LLC Ports in Cura Installation?

Cura is a name that every 3D printing enthusiast must have heard at some point, considering that it’s one of, if not the most used slicer software.

While both installing and using Cura are as easy as it comes, there is a slight detail during the installation process for Windows users, which has drawn the attention of many community members.

In a nutshell, a popup appears at some point during Cura installation, asking the user to install a device driver with the name Adafruit Industries LLC Ports, which prompted many community members to inquire about what it really is.

So, what is the Adafruit Industries LLC Ports driver that comes up during Cura installation?

The Adafruit Industries LLC Ports driver is part of the set of drivers Cura installs when you check the Install Arduino Drivers checkbox, which is necessary for your PC to connect to your 3D printer through USB.

If you wish to skip installing the driver, you can uncheck the Install Arduino Drivers checkbox.

Moving forward, we will take a deeper look into what these drivers are, if they are necessary, whether they are safe for installation or not, and how you can uninstall them if you wish to.

Table of Contents

What Is Adafruit Industries LLC Ports In Cura Installation?

We can’t deny that seeing a foreign name that you haven’t heard of before during the installation of Cura can be worrisome, as installing drivers you don’t know about is never a good idea.

Without further ado, let’s clear the air.

The Adafruit Industries LLC Ports device software is a necessary component of the Arduino USB driver suite, required for Cura to recognize your printer through a USB connection between your 3D printer and your PC.

You will also notice the installation of other Arduino-related drivers alongside the Adafruit Industries one, which further proves that this driver is part of Arduino USB drivers.

The Cura installer will only install this driver (and other Arduino-related drivers) if you check the Install Arduino Drivers checkbox before the installation process starts.

The reason behind the driver having the Adafruit name instead of Arduino is due to Adafruit being the developer for the driver, which they have developed as a contribution to Arduino.

Is Adafruit Industries Device Software Safe?

Another question regarding the Adafruit Industries device driver installation in Cura is whether it’s safe to install it or not.

The Adafruit Industries device software is part of the official Arduino USB drivers and is completely safe.

Since all Cura does is installing the standard Arduino USB drivers, you can also encounter the Adafruit Industries device software during the installation of the Arduino IDE if you check the Install USB driver box, which is further proof.

As Adafruit is a reputable company with a sizeable amount of contributions in the maker space, we don’t think that there is any reason to worry about the safety of these drivers.

While it’s a good idea to be vigilant about what you install on your computer, especially when it comes to drivers, you can be sure that the Adafruit Industries device software won’t cause any harm.

How Do I Uninstall Adafruit Industries LLC Ports Drivers?

If you don’t need the Adafruit Industries LLC Ports drivers and would like to uninstall them, here are the steps we recommend taking for the uninstallation process.

1. Bring the Start Menu up, type “cmd” into the search input, and press Enter to launch Command Prompt.
2. Run the commandSET DEVMGR_SHOW_NONPRESENT_DEVICES=1in Command Prompt, which will cause Windows to show hidden drivers in Device Manager.
3. Right-click the Start Menu button, and click Device Manager.
4. Click the View button on the menu, and choose the Show Hidden Devices option.
5. Locate the Adafruit Industries LLC Ports drivers in the list, right-click the entry, and click Uninstall.
6. Check the box with the text “Delete the driver software for this device” if it appears.
7. Click the OK button.

Upon following the steps above, the Adafruit Industries LLC Ports driver will disappear from the list, meaning that it’s uninstalled.

Does Cura Need Arduino USB Drivers?

While Cura asks you to install the Arduino USB drivers during the installation process, it doesn’t give a lot of information about whether these drivers are necessary for Cura to work or not.

Cura only installs Arduino USB drivers if you choose to, meaning that the drivers aren’t entirely necessary for Cura to operate.

As the Arduino USB drivers are only necessary for Cura to recognize your 3D printer through a USB connection between your PC and your 3D printer, you can skip installing these drivers if you aren’t planning on connecting your 3D printer to your PC through USB.

To skip installing the Arduino USB drivers, uncheck the box before the installation process starts.

Since the Adafruit Industries driver is also a part of the Arduino USB drivers, you will notice that the installer won’t prompt the installation of this driver if you aren’t installing the Arduino USB drivers.

As you can always install these drivers later down the road when you need them, you won’t be losing out on anything by opting not to at the current time.

On the other hand, installing these drivers and not using them won’t cause any harm to your computer either, meaning that you can feel free to install them now if you think that you will be using them later on.

Wrapping Up

We certainly understand that seeing the installation of third-party drivers that aren’t related to Ultimaker themselves while installing Cura can be worrying and confusing.

Fortunately, the Adafruit Industries LLC Ports drivers are nothing to worry about, as the developer of these drivers is one of the most reputable companies in the maker space, Adafruit.

While these drivers are only necessary for a USB connection between your computer and your 3D printer, installing them on your computer won’t do any harm regardless of whether you use them or not.

We hope that it has been an informative read, and we will see you next time!

Mike started his 3D printing journey with the Anet A8 when it first came out back in 2017, and has been obsessed with 3D printers ever since. Nowadays, he primarily uses his Ender 3 to print functional parts that make his life more convenient whenever possible.

Arduino.ru

Uno, motor shield, 2 шаговика. работа одновременно.

• Войдите на сайт для отправки комментариев

Сб, 21/05/2016 — 21:16
Серый_Ветер
Зарегистрирован: 03.04.2014

для теста код набрал код:

// Adafruit Motor shield library // copyright Adafruit Industries LLC, 2009 // this code is public domain, enjoy! #include long randSpeed_1; long randsteps_1; long randSpeed_2; long randsteps_2; // Connect a stepper motor with 48 steps per revolution (7.5 degree) // to motor port #2 (M3 and M4) AF_Stepper motor_1(20, 2); AF_Stepper motor_2(20, 1); void setup() < Serial.begin(9600); // set up Serial library at 9600 bps Serial.println("Stepper test!"); >void loop()

как заставить ходить оба движка одновременно?

а то получается что сначала один ходит влево, затем второй влево, потом так же по очереди вправо. а заставить одновременно ходить их. не смог.

• Войдите на сайт для отправки комментариев

Сб, 21/05/2016 — 22:28
Серый_Ветер
Зарегистрирован: 03.04.2014

почитал форум, уяснил что не ту библиотеку использую.

написал на новой библиотеке.

// MultiStepper // -*- mode: C++ -*- // // Control both Stepper motors at the same time with different speeds // and accelerations. // Requires the AFMotor library (https://github.com/adafruit/Adafruit-Motor-Shield-library) // And AccelStepper with AFMotor support (https://github.com/adafruit/AccelStepper) // Public domain! #include #include long randSpeed_1; long randsteps_1; long randSpeed_2; long randsteps_2; long randAcell_1; long randAcell_2; // two stepper motors one on each port AF_Stepper motor1(20, 1); AF_Stepper motor2(20, 2); // you can change these to DOUBLE or INTERLEAVE or MICROSTEP! // wrappers for the first motor! void forwardstep1() < motor1.onestep(FORWARD, SINGLE); >void backwardstep1() < motor1.onestep(BACKWARD, SINGLE); >// wrappers for the second motor! void forwardstep2() < motor2.onestep(FORWARD, SINGLE); >void backwardstep2() < motor2.onestep(BACKWARD, SINGLE); >// Motor shield has two motor ports, now we'll wrap them in an AccelStepper object AccelStepper stepper1(forwardstep1, backwardstep1); AccelStepper stepper2(forwardstep2, backwardstep2); void setup() < Serial.begin(9600); // set up Serial library at 9600 bps Serial.println("Stepper test!"); >void loop() < randSpeed_1 = random(4, 70); randSpeed_2 = random(4, 70); randAcell_1 = random(30, 70); randAcell_2 = random(30, 70); randsteps_1 = random(1, 8); randsteps_2 = random(1, 8); stepper1.setMaxSpeed(randSpeed_1); stepper2.setMaxSpeed(randSpeed_1); stepper1.setAcceleration(randAcell_1); stepper2.setAcceleration(randAcell_2); stepper1.moveTo(randsteps_1); stepper2.moveTo(randsteps_2); // Change direction at the limits if (stepper1.distanceToGo() == 0) stepper1.moveTo(-stepper1.currentPosition()); stepper1.run(); if (stepper2.distanceToGo() == 0) stepper2.moveTo(-stepper2.currentPosition()); stepper2.run(); Serial.println(randsteps_1); Serial.println(randsteps_2); Serial.println(randSpeed_1); Serial.println(randSpeed_2); Serial.println(randAcell_1); Serial.println(randAcell_2); >

1. скорость хоть и падает в терминал разная — двиглу абсолютно на это начхать. как взял при включении одну, так с ней и работает.

2. шаги рандомны во всех случаях, а необходимо только для цикла туда-обратно. а то получается что влево идет на 7 шагов, вправо на 3.

3. setAcceleration тоже не работает.

в общем еще сильнее запутался в ней.

• Войдите на сайт для отправки комментариев

Сб, 18/06/2016 — 23:44
Серый_Ветер
Зарегистрирован: 03.04.2014

В общем спустя кучу времени, засел снова, тем более что пришли шаговые движки нормальные, а не вырванные\выпиленные из флопов и сд-ромов.

код получился такой:

#include #include AF_Stepper motor1(2048, 1); AF_Stepper motor2(2048, 2); // SINGLE DOUBLE INTERLEAVE MICROSTEP! void forwardstep1() < motor1.onestep(FORWARD, SINGLE); >void backwardstep1() < motor1.onestep(BACKWARD, SINGLE); >void forwardstep2() < motor2.onestep(FORWARD, SINGLE); >void backwardstep2() < motor2.onestep(BACKWARD, SINGLE); >AccelStepper stepper1(forwardstep1, backwardstep1); AccelStepper stepper2(forwardstep2, backwardstep2); void setup() < >void loop() < if (stepper1.distanceToGo() == 0) < stepper1.moveTo(random(10, 90)); stepper1.setMaxSpeed((random(100, 200)) + 1); stepper1.setAcceleration((random(30, 200)) + 1); >if (stepper2.distanceToGo() == 0) < stepper2.moveTo(random(80, 700)); stepper2.setMaxSpeed((random(150, 300)) + 1); stepper2.setAcceleration((random(30, 300)) + 1); >stepper1.run(); stepper2.run(); >

получается примерно такой алгоритм:

включается, и начинает ходить влево на случайное число, потом возвращается на ту же точку, откуда включился и так в цикле пока не отключишь.

Но нужно немного другое, ход полностью примерно 125 градусов, соответственно влево\право делится на пополам и сейчас код отрабатывает как раз только половину. то есть от «нулевой» точки двиг ходит только влево, вправо он ни на один шаг не проходит?

полностью программно не знаю как решить эту проблему. а вот частично аппаратно и прораммно немного представляю.

на какую нибудь цифровую ногу вешаю кнопку.

при включении двиг начинает движение вправо, до тех пор пока не сработает кнопка, путем нажатия на кнопку рычагом одетым на ось двигателя и только потом начинает работать по циклу loop(с переделанными значениями конечно).

как задать при void setup движение вправо — могу, а как остановить его по прерыванию и задать рабочий режим?

• Войдите на сайт для отправки комментариев